Crop, straighten and rotate a RAW photo

Crop to a fixed aspect ratio or freely, straighten a tilted horizon, rotate in 90° steps and flip the image. How the crop tool works and what it does to masks.

4 min read Updated Open the editor →

The Crop tool sets the framing of the photo: you drag a frame over the image to crop it, straighten a tilted horizon with a slider or a handle, turn the image in 90° steps, and flip it. Like every other edit, cropping is non-destructive: the whole photo stays available, and you can change or reset the crop at any time.

Open it with the Crop tab in the Develop column, or press Shift 9.

Nikon D1X · NEF CC0, raw.pixls.us Exposure +0.60 · Contrast +20 · Highlights −40 · Shadows +45 · Vibrance +25 · Clarity +15 · Straighten +2.5°

  1. Rotate handle: drag around the frame to rotate
  2. Corner handle: drag to resize
  3. Inside the frame: drag to move the crop
While the Crop tool is open you see the whole photo. The area outside the frame is dimmed, and the rotated image leaves dark wedges at its edges.

Crop the photo

While the Crop tool is active, the canvas shows the whole image with the crop frame on top, so you can see what you are leaving out. The frame has a rule-of-thirds grid to help with placement.

  1. Drag a corner handle to resize the frame in both directions, or drag an edge to move one side.
  2. Drag inside the frame to move it without changing its size.
  3. To crop to a fixed shape, click one of the Aspect Ratio buttons first, then move the frame into place.
  4. Click any other tab, such as Basic, to see the cropped result.

There is no Apply button or Enter step: the crop takes effect as you drag, and leaving the Crop tool simply shows the cropped image. Each drag, button click or slider release is one step in the history, so Ctrl Z takes back the last change. The frame can’t extend past the edge of the photo, and it can’t be made narrower or shorter than 8% of the photo’s width or height.

Aspect ratios

The panel offers Free, 1:1, 4:3, 3:2, 16:9, 5:4, 7:5, and the portrait shapes 2:3, 4:5 and 9:16. Clicking a ratio sets the largest frame of that shape that fits the photo, centered. Use 3:2 or 4:5 for prints and social posts, 16:9 for screens and video thumbnails, 1:1 for square formats.

The highlighted button shows the shape the current frame has, not a lock. Dragging a handle afterwards changes the shape freely, and the highlight moves back to Free. Free itself resets the frame to the whole photo, keeping any rotation and flips.

Straighten and rotate

There are two ways to fix a tilted horizon:

  • Straighten slider: from −45° to +45° in 0.1° steps. Drag it, or click the number and type a value; in the number field the arrow keys change it by 0.1°, or by 1° with Shift. Double-click the slider to set it back to 0.
  • Rotate handle: the round handle above the top edge of the frame. Drag it around the frame’s center, watching the angle shown next to it, until the horizon lines up with the grid.

The Rotation readout in the panel shows the total rotation. Rotating past 45° with the handle turns into a quarter turn plus a smaller straighten angle, so you can turn the image any way you like.

Rotate L/R and flip

Rotate L and Rotate R turn the image 90° counter-clockwise or clockwise, for example when a portrait shot opens on its side. Flip H mirrors it left to right, Flip V top to bottom; the button stays highlighted while the flip is on, and a second click turns it off.

Do these before you crop. A quarter turn keeps the crop frame where it was on screen, as fractions of the width and height, so a crop drawn for the landscape view ends up over a different part of the photo, with a different shape, once the image is upright.

Reset, at the top of the panel, puts the crop, rotation and both flips back to the original framing in one step.

Masks, heal spots and other edits

Masks and heal spots are attached to the photo itself, not to the crop. When you crop, rotate or flip, a radial gradient stays on the face it was placed on and a heal spot stays on the speck it repaired. You can crop first and retouch later, or the other way round. See masks and heal and clone.

Every adjustment is calculated on the whole photo and cropped at the end. Two things to keep in mind:

  • The vignette is centered on the uncropped photo. After an off-center or tight crop, check the vignette again, or use a radial mask instead.
  • The export size follows the crop. The Output line of the Export panel shows the cropped size in pixels, so you can see how much resolution a tight crop leaves you.