Sharpening, noise reduction, vibrance and saturation

Sharpen a RAW photo, reduce luminance and color noise, and choose between Vibrance and Saturation. What the Detail panel's sliders do and how to judge them at 100%.

5 min read Updated Open the editor →

The Detail panel sharpens the image, reduces noise, and holds the two global color-intensity sliders, Vibrance and Saturation. Sharpening and noise reduction both work on single pixels, so set them while looking at the image at 100%, where one image pixel fills one screen pixel. Vibrance and Saturation can be judged at any zoom.

Open the panel with the Detail tab in the Develop column, or press Shift 7. If you know Lightroom, note that Vibrance and Saturation live here, not in the Basic panel.

Nikon Z 5 · NEF CC0, raw.pixls.us Exposure +0.50 · Contrast +20 · Highlights −30 · Shadows +20 · Blacks −10 · Sharpening 60 / Radius 1.0 · Luminance 15 · Chroma 25

Judge sharpening and noise at 100%. The status bar shows 100% · Full-res when the view is drawn from the full-resolution image.

Look at 100% first

  1. Press 1, or click 100% in the status bar, to view the image at one image pixel per screen pixel.
  2. Drag the image (or hold Space and drag) to a spot with both fine detail and a smooth area, such as an eye and a cheek, or a branch against the sky.
  3. Set noise reduction first, then sharpening, then press F to fit the image and check the overall look.

The order of the sliders on screen doesn’t change the processing order: noise reduction is always applied before sharpening, whatever you touch first. See viewing and comparing for zoom and pan controls.

Sharpening

ControlRangeDefaultWhat it does
Amount0 to 1500Strength of the sharpening; 0 turns it off
Radius0.5 to 3.01.0Size of the detail that gets sharpened

Sharpening is an unsharp mask on brightness only. Each pixel is compared with its neighbors at the Radius distance, and the difference is increased. Because it leaves color alone, color edges don’t get colored fringes and color noise is not sharpened. A soft limit holds back the strongest edges, such as the sun or specular highlights on chrome, so they don’t ring with dark and light outlines.

Radius is measured relative to the image size, so the sharpening looks the same at Fit, at 100% and in the export. On a 24-megapixel file (6000 pixels wide), Radius 1.0 reaches about two pixels; on smaller files it is closer to one.

Practical starting points:

  • Landscapes and architecture: Amount 40 to 70, Radius 0.8 to 1.0.
  • Portraits: Amount 20 to 40, Radius 1.0 to 1.5, so skin texture is not exaggerated.
  • Soft lenses or slight motion blur: a larger Radius, 1.5 to 2.0, with a moderate Amount. Past that, halos appear before the image looks sharper.

Noise reduction

ControlRangeDefaultWhat it does
Luminance0 to 1000Smooths brightness noise (grain-like speckle) while keeping edges
Chroma0 to 1000Smooths color noise (red, green and blue blotches)

Luminance averages each pixel with neighbors of similar brightness and ignores neighbors that are much brighter or darker, so edges stay in place while flat areas get smoother. Higher values widen what counts as similar and blend more of the smoothed result in; at 100 the pixel is replaced by the smoothed value entirely. Too much makes skin and foliage look waxy. Start around 10 to 25 and stop as soon as the speckle no longer distracts.

Chroma blurs only the color information over a small area and keeps brightness untouched, which removes the colored blotches that high-ISO files show in shadows. Most files from ISO 800 upwards benefit from Chroma 20 to 40. Chroma does not look for edges, so at high values small colored details (a red berry, colored text) can bleed into their surroundings: zoom in on a fine colored detail to check.

Vibrance and Saturation

ControlRangeDefaultWhat it does
Vibrance−100 to +1000Raises or lowers the intensity of muted colors most, vivid colors least
Saturation−100 to +1000Raises or lowers the intensity of every color equally

Saturation moves every color away from or towards gray by the same proportion. At +100 colors are twice as far from gray as before; at −100 the image is black and white, using the brightness of each color.

Vibrance does the same, but scales the change by how muted each color already is. Grey and pastel colors get the full effect, while colors that are already vivid change little or not at all. That makes it the safer slider for a whole photo: it lifts a dull sky or foliage without pushing a red jacket or a sunset into clipping.

A common pairing is Vibrance +20 to +30 with Saturation at 0 or slightly negative. Saturation is applied first, then Vibrance on the result, so a negative Saturation combined with a positive Vibrance evens colors out: vivid colors calm down while muted ones come up.

  • Presence: Texture and Clarity, which change how sharp an image looks at normal viewing size.
  • Masks: local Sharpness, Clarity and Saturation for part of the photo.
  • Export: how the full-resolution render is scaled to the output size.
  • Try it in the editor.