View a RAW photo: zoom, before/after and clipping

Zoom to Fit or a true 100%, pan with a mouse or touch, compare before and after, show clipped highlights and shadows, and read the histogram and the camera data.

6 min read Updated Open the editor →

The view controls change what you see on screen, never the edit or the exported file. Four of them do most of the work: Fit (F) shows the whole photo, 100% (1) shows real pixels, the before/after split (\) shows how far the edit has come, and the clipping indicators (J) show where highlights and shadows have run out of detail.

If you haven’t found your way around the screen yet, start with the workspace.

Fit, 100% and the zoom presets

Fit shows the whole image in the space between the panels. Press F, click the Fit icon in the middle of the toolbar or the Fit preset in the status bar, or double-click the image.

100% shows one image pixel on each pixel of your screen. Press 1 on the number row, or click 100% in the status bar. On a high-density display (a Retina or other 2× screen) the photo then looks half as large as on an ordinary monitor, because each image pixel lands on one physical pixel. This is the same convention Lightroom and Photoshop use. For a bigger view, use 200% or 400%.

The status bar also offers 50%. The presets zoom about the centre of the view. The scale shown at the end of the status bar, and in the info bar above the photo, is always the real one: at Fit it might read 33% for a 24-megapixel file. You can zoom out to a quarter of the Fit size and in to 1600%. A preset that falls outside that range for the current image is greyed out.

Canon EOS 750D · CR2 CC0, raw.pixls.us Exposure +0.55 · Contrast +25 · Highlights −55 · Shadows +40 · Whites +20 · Blacks −20 · Vibrance +30

At 100% the status bar adds “Full-res”: the view is drawn from the full-resolution image.

Full resolution and the working preview

To stay responsive, the editor draws fitted views from a working preview of 3072 pixels on the long edge. Once you zoom in past the detail that preview holds, it renders just the visible part of the photo from the full-resolution data, and the status bar adds · Full-res. Judge sharpening, noise reduction and retouching only when that tag is showing. See Detail for what to look for.

Zoom and pan with a mouse

  • Scroll to zoom about the pointer: the spot under it stays put. Each notch zooms about 10%. To reverse the direction, turn on Invert scroll zoom in Settings.
  • Drag the image to pan, as long as the active tool doesn’t use clicks on the image.
  • In tools that do (Crop, Heal, and masks with handles or a brush), hold Space and drag. You can turn this off with Spacebar pans in Settings.
  • Double-click to go back to Fit.

Panning stops when an edge of the photo reaches the edge of the view. A photo smaller than the view stays centred.

Touch gestures on a tablet

  • Drag with one finger to pan, when the active tool doesn’t use the touch.
  • Pinch with two fingers to zoom about the point between them; move both fingers together to pan at the same time. Lifting one finger carries on panning with the other.
  • Double-tap to switch between Fit and 100%. Zooming in keeps the spot you tapped under your finger.

A second finger always means navigation. If the first finger had started something in a tool, such as a brush stroke on a mask or a heal spot, putting the second finger down cancels it, so you can zoom mid-task without leaving a mark.

Compare before and after

The “before” is the photo as decoded, with none of your adjustments, masks or heal spots, but framed by your current crop. There are two ways to see it.

The split view

Press \ or click the split icon at the left of the centre toolbar group. A divider appears with the before on its left and the after on its right. Drag the divider or its round handle to move the split. While the split is on, the status bar shows Compare. Press \ again to turn it off.

Canon EOS 750D · CR2 CC0, raw.pixls.us Exposure +0.55 · Contrast +25 · Highlights −55 · Shadows +40 · Whites +20 · Blacks −20 · Vibrance +30

Left of the divider is the unedited decode, right of it the current edit.

Hold B

Hold B to see the whole view as the before; let go to return. If the split view is on, you return to the split. This needs a keyboard, and you can turn it off with Hold B to compare in Settings.

The before is always the flat starting point. To compare against an earlier stage of your own edit, click a step in the History column instead (see history and autosave).

Clipping indicators

Press J or click the layered icon at the right of the centre toolbar group. The editor paints:

  • Red where at least one color channel has reached the brightest value the output can hold. Detail there is lost or flattened in the export.
  • Blue where all three channels are at or close to black.

The colors are drawn on screen only and never end up in the exported file.

Canon EOS 750D · CR2 CC0, raw.pixls.us Exposure +1.60 · Contrast +25 · Highlights −55 · Shadows +40 · Whites +20 · Blacks −20 · Vibrance +30

With Exposure at +1.60 the cloud bank is clipped. Pulling Exposure, Highlights or Whites back clears the red.

To clear red areas, lower Highlights or Whites first: they work on the bright end of the range, while Exposure moves every tone. The Basic panel page covers each slider. A few red pixels on the sun or a specular glint are normal. Blue areas are a matter of taste: lift Blacks or Shadows if you want detail there.

The histogram

The histogram in the top right corner of the image plots the red, green and blue channels of the image as it is displayed, with every adjustment applied. Black is at the left edge and white at the right. It redraws a moment after each change.

The vertical scale is compressed (square root), so one large area of a single tone, such as a clear sky or open water, doesn’t flatten the rest of the graph. Read it for where the tones sit, not for exact proportions. A pile-up against the right edge means clipped highlights: press J to see where.

The histogram is computed from the whole edited photo, rendered small on the side. It describes the whole image even when you zoom in on part of it, and clipping indicators, the mask overlay and the split view don’t change it. If the device can’t do that render, the label changes to Histogram · View and the graph is read from the screen instead: it then covers only the visible part, overlays included.

Camera data

The info bar above the photo and the status bar show the camera model, ISO, shutter speed, aperture and focal length the camera recorded. Open the History column for the same data laid out as a table, with the file size added.

Canon EOS 750D · CR2 CC0, raw.pixls.us

The Source table under the history list. Lens and capture date are not shown.

The editor does not show the lens model or the capture date. Supported cameras explains what is read from the RAW file.