The editor workspace: toolbar, panels and status bar
A tour of the Raw Photo Editor workspace. What the toolbar, info bar, histogram, Develop tabs, status bar and settings do, and how the layout changes on a tablet.
The editor has one workspace. The toolbar runs across the top, the photo sits in the middle with its histogram, the Develop panel on the right holds every adjustment, and a status bar runs along the bottom. A History column can open on the left. Everything on this page appears as soon as a RAW file is open in the editor.
Canon EOS 750D · CR2 CC0, raw.pixls.us Exposure +0.55 · Contrast +25 · Highlights −55 · Shadows +40 · Whites +20 · Blacks −20 · Vibrance +30
- File actions: Open, Presets, Load settings, Undo and Redo
- View toggles: before/after split, Fit, clipping indicators
- Export opens the Export tab (the gear next to it opens Settings)
- Info bar: file name and capture details
- Active tool, image size and zoom; History and Develop show or hide the side columns
- Histogram of the rendered image
- Develop tool tabs
- The active tab’s sliders
- Status bar: zoom presets and the current scale
The toolbar
The left group handles files and history:
- Open shows your system’s file picker, filtered to the RAW formats the editor accepts. The shortcut is Ctrl O (⌘ O on a Mac), and it works even before an image is open. Opening a file replaces the current one. Your edit to the current photo is already saved in the browser; only if that save failed does the editor ask before it lets go.
- Presets opens a list of built-in and saved looks. See presets.
- Load settings (the arrow icon) reads a
.bre.jsonsettings file and applies it to the open photo as a new step, so Ctrl Z takes it back. - Undo and Redo: Ctrl Z and Ctrl Shift Z (Ctrl Y also redoes).
The three icons in the centre change only what you see, never the edit: the before/after split (\), Fit to screen (F) and the clipping indicators (J). Viewing and comparing explains each one.
On the right, the gear opens Settings and Export jumps to the Export tab of the Develop panel. Nothing is saved to disk until you click Export Image there.
The info bar
The strip above the photo shows the file name and what the camera recorded: model, ISO, shutter speed, aperture and focal length. On its right are three chips: the name of the active tool, the image’s full size in pixels, and the current zoom.
Next to them, History and Develop show or hide the left and right columns. Hiding Develop gives the photo the full width, which helps when you judge a composition or a crop.
The canvas and histogram
The photo fills the middle of the window. A histogram floats in its top right corner and redraws a moment after each change. Small hints in the bottom left corner remind you of the mouse controls (Space to pan, Scroll to zoom, 2x Click to reset the view to Fit); in the Crop tool they change to crop and rotate hints.
Messages about your edit appear at the top of the canvas: that an earlier edit was restored (with Start fresh), that a settings file couldn’t be loaded, or that edits aren’t being saved in this browser. History and autosave covers what to do with each.
The Develop panel
The tool tabs sit in two rows at the top of the Develop panel. Click one to show its controls below.
| Tab | What it holds | Shortcut |
|---|---|---|
| Basic | White balance and the Basic tone sliders together | Shift 1 |
| WB | White balance alone: Temp, Tint, Pick, channel gains | Shift 2 |
| Curve | Tone curve | Shift 3 |
| HSL | Hue, saturation and luminance per color band | Shift 4 |
| Grade | Color grading | Shift 5 |
| Pres | Presence: Texture, Clarity, Dehaze, Vignette, Grain | Shift 6 |
| Detail | Sharpening, Vibrance & Saturation, Noise Reduction | Shift 7 |
| Mask | Masks and their local adjustments | Shift 8 or M |
| Heal | Heal / Clone and the backscatter finder | H |
| Crop | Crop, straighten, rotate and flip | Shift 9 |
| Export | Format, size and the export button | Shift 0 |
The tab shortcuts use the digit row by key position, so they work on any keyboard layout. They also open the Develop panel if it is hidden.
Working with sliders
Every slider shares the same habits:
- A small amber dot next to the name means the value differs from its default.
- Double-click the slider to reset it. When anything in a section has changed, a Reset button appears in the section header and resets the whole section.
- Click the number on the right to type an exact value, then press Enter, or Esc to cancel. While you type, ↑ and ↓ step the value, and adding Shift takes steps ten times larger.
- Each drag, and each typed value, becomes one step in History, so one undo reverses one move. A click that leaves the value where it was adds no step.
The History column
Click History in the info bar to open a list of every step of the edit. It starts with Original (the photo as decoded, with no adjustments) and numbers each change after it. An edit brought back from an earlier session shows as Restored edit. Click any step to go back to it. The later steps stay in the list until you make a new change, which replaces them.
Below the list, Source shows the camera, ISO, shutter speed, aperture, focal length and file size.
The status bar
The left side repeats the file name and capture details. The right side holds the zoom presets Fit, 50%, 100%, 200% and 400%, then the current scale. It reads · Full-res when the view is drawn from the full-resolution image rather than the working preview, and Compare while the before/after split is on. A preset that is greyed out is beyond the zoom range for this image.
Settings
The gear in the toolbar opens Settings. Click Close or anywhere outside the dialog to leave it.
- Saved edits shows how many photos have edits stored in this browser, with Clear saved edits.
- Control density: Comfortable or Compact. Compact tightens slider rows and section headers, so more controls fit on a small screen without scrolling.
- Show canvas hints turns the hint chips on the canvas on or off.
- Canvas Behavior: Keyboard shortcuts turns all of the editor’s shortcuts on or off, including Ctrl Z; Spacebar pans and Hold B to compare turn off just those keys; Invert scroll zoom reverses the mouse wheel.
At the bottom, a Hotkeys list summarises the keyboard shortcuts. The full table is on the keyboard shortcuts page.
Tablets and narrow windows
Hasselblad Lunar · ARW CC0, raw.pixls.us
The layout follows the width of the window:
- 1220 px and wider: the Develop panel opens with the photo, and the History column is available.
- 880 to 1219 px (most tablets): the Develop panel starts closed. Tap Develop to open it; choosing a tool with a shortcut or tapping Export opens it too. History opens over the left edge of the photo instead of as a column beside it.
- Narrower than 880 px: History, Develop and Settings move to buttons along the bottom of the screen, each opening a sheet over the photo. The status bar is replaced by a small Fit / 100% control on the canvas.
On touch screens the canvas hints are hidden, since they describe a keyboard and mouse. Pinch, drag and double-tap work instead; see viewing and comparing.